Hand Taps
1/4″ Hexagon Drive Taps
- Taps with 1/4″ hexagon drive for using in power tools.
| Art No. | Size
mm |
Drilled Hole
mm |
L1
mm |
L
mm |
S.P.Q.
pc |
| 825030
825040 825050 825060 825080 825100 |
M3x0.5
M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5 |
2.5
3.3 4.2 5 6.8 8.5 |
11
12 15 18 19 21 |
33
35 36 39 40 41 |
1
1 1 1 1 1 |
Combined Drill-Taps
- For drilling and threading in one operation.
| Art No. | Size
mm |
mm |
L1
mm |
L
mm |
S.P.Q.
pc |
| 824030
824040 824050 824060 824080 824100 |
M3x0.5
M4x0.7 M5x0.8 M6x1.25 M8x1.25 M10x1.5 |
2.5
3.3 4.2 5 6.8 8.5 |
18
20 20 22 28 32 |
63
63 70 80 100 110 |
1
1 1 1 1 1 |
UNC Hand Taps
- 3pc Hand taps set, for tapping both through and blind holes.
- Taper-used as a starter tap.
- Second-ideal for tapping through holes.
- Bottom-allows threading closer to the bottom of a blind hole.
- With BSW thread.
| Art No. | Size
mm |
mm |
L1
mm |
L
mm |
a
mm |
S.P.Q.
pc |
| 823010
823020 823030 823040 823050 823060 823080 823110 823120 823160 823200 823240 823280 823320 823360 823400 823480 |
No.1-64
No.2-56 No.3-48 No.4-40 No.5-40 No.6-32 No.8-32 No.10-24 No.12-24 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 9/16-12 5/8-11 3/4-10 |
2.5
2.8 2.8 3.5 3.5 4.0 4.5 6.0 6.0 6.0 6.0 7.0 8.0 9.0 11.0 12.0 14.0 |
10
11 11 12 12 14 14 16 18 19 22 24 24 29 30 32 40 |
32
36 36 40 40 45 45 50 50 50 56 70 70 75 80 80 95 |
2.1
2.1 2.1 2.7 2.7 3.0 3.4 4.9 4.9 4.9 4.9 5.5 6.2 7.0 9.0 9.0 11.0 |
3
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 |
BSW Hand Taps
- 3pc Hand taps set, for tapping both through and blind holes.
- Taper-used as a starter tap.
- Second-ideal for tapping through holes.
- Bottom-allows threading closer to the bottom of a blind hole.
- With BSW thread.
| Art No. | Size
mm |
mm |
L1
mm |
L
mm |
a
mm |
S.P.Q.
pc |
| 822012
822016 822020 822024 822028 822032 822036 822040 822048 |
3/16-24
1/4-20 5/16-18 3/8-16 7/16-14 1/2-12 9/16-12 5/8-11 3/4-10 |
5
6.3 8 10 8 9 11.2 12.5 14 |
16
19 22 24 25 29 30 32 37 |
58
66 72 80 85 89 95 102 112 |
4
5 6.3 8 6.3 7.1 9 10 11.2 |
3
3 3 3 3 3 3 3 3 |
Metric Hand Taps
- 3pc Hand taps set, for tapping both through and blind holes.
- Taper-used as a starter tap.
- Second-ideal for tapping through holes.
- Bottom-allows threading closer to the bottom of a blind hole.
- With Metric thread.
| Art No. | Size
mm |
mm |
L1
mm |
L
mm |
a
mm |
S.P.Q.
pc |
| 821040
821050 821060 821070 821080 821090 821100 821110 821040
|
M4x0.7
M5x0.8 M6x1 M7x1 M8x1.25 M9x1.25 M10x1.5 M11x1.5 M12x1.75 |
4.5
6.0 6.0 6.0 6.0 7.0 7.0 8.0 9.0 |
13.0
16.0 19.0 19.0 22.0 22.0 24.0 24.0 29.0 |
45
50 50 50 56 63 70 70 75 |
3.4
4.9 4.9 4.9 4.9 5.5 5.5 6.2 7.0 |
3
3 3 3 3 3 3 3 3 |