Diamond Blades
Diamond Cutting Blade-Segmented
- Segmented typeAdvantages:
- Optimum disc cooling during its operation,contributing to a higher cutting speed and lower effort applied.
- Designed for operation without special cooling.
| Art No. |  1 |
2 |
S.P.Q.
pc |
||
| mm | inch | mm | inch | ||
| 611111
611113 611121 611123 611131 611151 611171 611173 |
115
115 125 125 150 180 230 230 |
4.5″
4.5″ 5″ 5″ 6″ 7″ 9″ 9″ |
20\22.2
20\22.2 20\22.2 20\22.2 20\22.2 22.2\25.4\30 22.2\25.4\30\50 22.2\25.4\30\50 |
20\7/8″
20\7/8″ 20\7/8″ 20\7/8″ 20\7/8″ 7/8″\1″\1-1/5″ 7/8″\1″\1-1/5″\2″ 7/8″\1″\1-1/5″\2″ |
1
3 1 3 1 1 1 3 |
Diamond Cutting Blade-Continuous
- Continuous typeAdvantages:
- Provides a maximum cutting accuracy and neatness without any chippings and irregularities even for glazed tiles.
- Thanks to a special design of the cutting edge these discs have relatively low performance features.
- That’s why they are used for operation just in those cases when a high-quality accurate cut is required for processing low-strength materials.
- Designed for use with obligatory water cooling.
| Art No. |  1 |
2 |
S.P.Q.
pc |
||
| mm | inch | mm | inch | ||
| 610111
610113 610121 610131 610151 610171 |
115
115 125 150 180 230 |
4.5″
4.5″ 5″ 6″ 7″ 9″ |
20\22.2
20\22.2 20\22.2 20\22.2 22.2\25.4\30 22.2\25.4\30\50 |
20\7/8″
20\7/8″ 20\7/8″ 20\7/8″ 7/8″\1″\1-1/5″ 7/8″\1″\1-1/5″\2″ |
1
3 1 1 1 1 |
Diamond Cutting Blade-Turbo
- Turbo typeAdvantages:
- For various applications with a wide range of construction materials.
- Relatively low cost with significantly high cutting performance.
- Can be used for dry-cutting without special water cooling.
| Art No. | 1 | 2 | S.P.Q.
pc |
||
| mm | inch | mm | inch | ||
| 612111
612113 612121 612131 612151 612171 |
115
115 125 150 180 230 |
4.5″
4.5″ 5″ 6″ 7″ 9″ |
20\22.2
20\22.2 20\22.2 20\22.2 22.2\25.4\30 22.2\25.4\30\50 |
20\7/8″
20\7/8″ 20\7/8″ 20\7/8″ 7/8″\1″\1-1/5″ 7/8″\1″\1-1/5″\2″ |
1
3 1 1 1 1 |
Diamond Cutting Blades Laser Welded
- Universal use on cured concretebricksgranite, sandstone block, building materials,etc.
- Heavy duty,very long lifetime, fast cutting, dry and wet use.
- For hand held saws, high speed saws, low H.P.
- walk behind saws 3-18 H.P.
| Art No. |  1 |
2 |
S.P.Q.
pc |
||
| mm | inch | mm | inch | ||
| 613111
613121 613131 613151 613171 |
115
125 150 180 230 |
4.5″
5″ 6″ 7″ 9″ |
20\22.2
20\22.2 20\22.2 20\22.2 20\22.2 |
20\7/8″
20\7/8″ 20\7/8″ 20\7/8″ 20\7/8″ |
1
3 1 1 1 |